Medical airtight door

A so-called medical motorized airtight door is actually a door that pans. It quickly recognizes the movement of a person approaching the door and opens the door for them. Then it opens the door through the drive system and closes the door automatically after the person leaves.

Classification：

Hermetic Sliding Doors

keywords：

8613335219899

xiuqiangindustry@gmail.com

Inquiry

Contact

Medical airtight door

What is a motorized airtight door for medical use?

What is the installation method of medical electric airtight door?

1. Before installation, firstly remove the wooden strips of the wooden box sealing from the end of the mechanism, and then pull out the door row from the wooden box.

2. Find the header key. The header key is usually tied to a movable round tube on the crossbar at the end of the door row and wrapped with a bandage.

3. Next, you can use the key to open the top cover and remove the white box next to the motor that contains the wireless remote, wireless console control and clutch key.

4. If it doesn't move smoothly when using the remote, the motor clutch is not closed and needs to be debugged.　　5. After commissioning, close the door row against the wall. There are three fixings at the bottom of the end of the door body which need to be fixed.

6. After the door body close to the wall, the door body as the center of the position shall prevail, and then in the left and right walls of the left and right sides, along the door rows of the middle of the straight line every 20-25 cm embedded in a round magnet.

7. After embedding the magnet, when it is time to close the door row, you need to bury the square magnet directly under the parking part of the header.

8. When the door is extended, the square magnet should be embedded directly below the stopping position of the header within 30-100 mm after the header is fully extended.

9. When the door is 1000 mm from the closing wall, the square magnet is buried under the bottom of the head 150 mm from the round magnet.

10. The closing step is to turn on the 220 volt power supply. The voltage must not fall below 180 volts. The three power lines correspond to the red, yellow and blue lines. After connecting the lines, it is done.

Medical electric airtight door features attributes

1. Durable, no deformation

Traditional hospital doors are easily deformed due to climate change, frequent switching and impact. The medical door improved based on years of industry experience adopts advanced technology and introduces advanced equipment at home and abroad. Adopting superior galvanized steel plate produced by well-known domestic manufacturers, filled with flame-retardant honeycomb paper or aluminum honeycomb core material, changing the shortcomings of the door easy to deform.

2.Moisture-proof

Medical door manufacturers believe that the traditional hospital doors will swell and deform if they are exposed to moisture after a period of time. Breakthrough industry bottlenecks, to solve the problem of underwater door frame door deformation. The new medical door frame adopts a fully closed design, effectively blocking moisture infiltration. The bottom of the door frame (near the ground) is treated with ABS nano board to prevent moisture from penetrating into the door frame. The back of the door frame (near the wall) is treated with moisture-proof board to completely stop water penetration.

3. Antibacterial, wear-resistant, easy to clean

Hospitals have heavy traffic, many bumps and bacteria, so hospital doors need to be antibacterial, easy to clean and wear-resistant. Traditional hospital doors use ordinary panels can not meet these requirements. The newly launched hospital door in the door panel selection of international environmental protection professional hospital special door panels, can realize the above functions of the hospital.

4. Anti-collision and anti-cracking

(1) The door plate is 50mm flat steel door, wear-resistant, scratch-resistant ability is more than 2 times the traditional medical door.

(2) The surface of the door plate adopts electrostatic spraying process, with smooth paint surface and strong adhesion.

(3) The door can be equipped with anti-collision belt, the anti-collision belt is made of excellent 304 stainless steel. After hundreds of tests, the design of the anti-collision belt has good anti-collision performance and does not rust.

Medical airtight door